Precision Compression Technology




During a recent fishing trip on ‘Onyer Marks Too’ near Lochgilphed on the west coast of Scotland a LYNX Conger Rig (made using Precision Compression Technology) was, unintentionally, tested to the absolute limit.

Skipper, Matthew Burrett and keen angler Dave Robertson, were targeting big Common Skate. While doing this, as they had heard rumors of a few tope still in the vicinity, they decided to fish a lighter rig and set up for a potential hook up with a Tope.

The ‘Tope’ rod was the first to get a bite and after a 40 minute battle Dave landed a Skate of 163lbs. The catch was independently witnessed by a Scottish Government marine scientist’s. They were present in the area conducting research into the migratory movements of Common Skate.

In David’s own words ‘ The LYNX Conger trace with a 70lb. monofilament trace and a 6/0 hook safely hauled up and landed a 163lb. Skate from over 400 feet of water - which was a very convincing (albeit unintentional) demonstration of the strength and reliability of these rigs’

The very same rig also accounted for numerous Bull Huss, Tope, Spur Dog and Thornbacks on previous trips.

The following day, the same tactics were employed as the day before. Skate rigs were dropped to target Skate and a ‘Tope’ rod was also deployed again in exactly the same manner.

The ‘Tope’ rod was the first to set away again. Following a one-hour battle on the ‘Tope’ rod, a 193lb Skate was landed by Dave Robertson, on the same LYNX rig.

Skipper, Matthew Burrett commented ‘as you would expect, during the fight with the Skate, the 50lb class boat rods were completely maxed out. An unbelievable amount of pressure needs to be exerted on the fish to get it off the bottom. Fish of this size are completely brutal on tackle.

Matthew went on to add ‘These new LYNX rigs are incredibly strong! This can only be a benefit to as it will reduce fish lost by equipment failure, which often happens even with well known brands.

Image: Dave Robertson with a 193lb Skate landed aboard On Yer Marks on a LYNX Conger trace.

I really like the neatness of Precision Compression Technology, the finish and the bait presentation is massively improved due to the neat, revolutionary joining process. The neat design also means there are no sharp edges, this means reduced cuts to my hands which I often get as a fish struggles at the side of the boat.


Ultimately the reliability of them has now been proven beyond doubt. Landing a 163lb, and then a 193lb, Skate in two days (as well as other fish) on the same 70lb rig, is proof enough for anyone. These do exactly what it says on the tin’

Comments